Running

Running

Intel Edison, NoSwUpd Version

resetting ...


******************************
PSH KERNEL VERSION: b0182929
                WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 10:14:01 Jan 13 2015

******* PSH loader *******
PCM page cache size = 192 KB 
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application *** 


U-Boot 2014.04 (Apr 28 2016 - 01:11:21)

       Watchdog enabled
DRAM:  980.6 MiB
MMC:   tangier_sdhci: 0, tangier_sdhci: 1
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0 
Target:blank
Partitioning already done...
Flashing already done...
GADGET DRIVER: usb_dnl_dfu
Card did not respond to voltage select!
** Bad device mmc 1 **
reading vmlinuz
5296624 bytes read in 131 ms (38.6 MiB/s)
Booting from emmc ...
Valid Boot Flag
Setup Size = 0x00003c00
Magic signature found
Using boot protocol version 2.0c
Linux kernel version 3.10.98-yocto-standard (jenkins@ostro-worker-20) #1 SMP PREEMPT Fri Apr 29 15:11:6
Building boot_params at 0x00090000
Loading bzImage at address 00100000 (5281264 bytes)
Magic signature found
Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 cons"

Starting kernel ...

[    0.622458] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.622537] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[    0.622641] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.622703] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[    1.562816] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[    1.572425] pmic_ccsm pmic_ccsm: Battery Over heat exception
[    1.572502] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

Welcome to Ostro OS 1.0~snapshot-20160502!

[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Created slice system-wpa_supplicant.slice.
[  OK  ] Reached target Slices.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Listening on Journal Socket.
         Starting File System Check on Root Device...
         Starting ip6tables firewall...
         Mounting Temporary Directory...
         Starting iptables firewall...
         Starting Create list of required st... nodes for the current kernel...
         Starting Setup Virtual Console...
         Mounting Debug File System...
         Starting Load Kernel Modules...
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[  OK  ] Reached target Swap.
         Starting Journal Service...
[  OK  ] Reached target Paths.
         Mounting POSIX Message Queue File System...
[  OK  ] Reached target Remote File Systems.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Started File System Check on Root Device.
[  OK  ] Started ip6tables firewall.
[  OK  ] Started iptables firewall.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[  OK  ] Started Setup Virtual Console.
[  OK  ] Started Journal Service.
[  OK  ] Started Load Kernel Modules.
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Mounting Configuration File System...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Create System Users...
         Starting Rebuild Dynamic Linker Cache...
         Starting Rebuild Hardware Database...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Create System Users.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Rebuild Dynamic Linker Cache.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /var/volatile...
[  OK  ] Mounted /var/volatile.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Found device /sys/subsystem/net/devices/wlan0.
         Starting Load/Save Random Seed...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Rebuild Hardware Database.
         Starting udev Coldplug all Devices...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Found device /dev/ttyMFD2.
[  OK  ] Found device /dev/mmcblk0p5.
         Mounting /factory...
[  OK  ] Mounted /factory.
[  OK  ] Reached target Local File Systems.
         Starting Commit a transient machine-id on disk...
         Starting Rebuild Journal Catalog...
         Starting Create Volatile Files and Directories...
[  OK  ] Started Rebuild Journal Catalog.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Reached target Sound Card.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
         Starting Update is Completed...
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Commit a transient machine-id on disk.
[  OK  ] Started Update is Completed.
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Reached target System Initialization.
         Starting sshd.socket.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on sshd.socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Bluetooth rf kill event daemon.
         Starting Permit User Sessions...
[  OK  ] Started D-Bus System Message Bus.
         Starting Connection service...
         Starting Network Service...
         Starting Login Service...
[  OK  ] Started WPA supplicant daemon (interface-specific version).
[  OK  ] Started Daemon to load edison mcu app binary.
Application available at (physical) address 0x04819000
        VRL mapped to 0xff213000
        App size = 11508 bytes

        App Authentication feature is disabled!
        Resetting I������2j��ٲy to receive application *** 
[  OK    OK  ] Started Permit User Sessions.
[  OK  ] Started Connection service.
[  OK  ] Started Login Service.
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyMFD2.
[  OK  ] Reached target Login Prompts.
[  OK  ] Reached target Network.
[  OK  ] Reached target Multi-User System.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Ostro OS 1.0~snapshot-20160428 edison ttyMFD2

edison login: root (automatic login)

Last login: Thu Apr 28 00:41:36 UTC 2016 on tty1
************************************
*** This is a development image! ***
*** Do not use in production.    ***
************************************
root@edison:~#

Intel Edison, SwUpd Version

Linux kernel version 3.10.98-yocto-standard (jenkins@ostro-worker-20) #1 SMP PREEMPT Fri Apr 29 15:11:1
1 UTC 2016
Building boot_params at 0x00090000
Loading bzImage at address 00100000 (5281264 bytes)
Magic signature found
Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 conso
le=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-user.targ
et hardware_id=00 g_multi.iSerialNumber=4d143757d2d7fce20e89640fee58c2af g_multi.dev_addr=02:00:86:58:c
2:af platform_mrfld_audio.audio_codec=dummy fsck.mode=skip"

Starting kernel ...

[    0.622474] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.622552] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[    0.622655] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.622718] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[    1.566623] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[    1.576468] pmic_ccsm pmic_ccsm: Battery Over heat exception
[    1.576547] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

Welcome to Ostro OS 1.0~snapshot-20160502!

[  OK  ] Reached target Swap.
[  OK  ] Listening on Network Service Netlink Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Created slice System Slice.
         Starting Setup Virtual Console...
         Starting ip6tables firewall...
[  OK  ] Created slice system-getty.slice.
         Mounting Debug File System...
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Starting File System Check on Root Device...
         Starting Create list of required st... nodes for the current kernel...
[  OK  ] Created slice system-wpa_supplicant.slice.
         Mounting POSIX Message Queue File System...
         Starting iptables firewall...
[  OK  ] Created slice User and Session Slice.
         Mounting Temporary Directory...
[  OK  ] Reached target Slices.
         Starting Load Kernel Modules...
[  OK  ] Listening on Journal Socket (/dev/log).
         Starting Journal Service...
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Started Setup Virtual Console.
[  OK  ] Started ip6tables firewall.
[  OK  ] Started File System Check on Root Device.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[  OK  ] Started iptables firewall.
[  OK  ] Started Journal Service.
[  OK  ] Started Load Kernel Modules.
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Mounting Configuration File System...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Rebuild Dynamic Linker Cache...
         Starting Flush Journal to Persistent Storage...
         Starting Rebuild Hardware Database...
         Starting Create System Users...
[  OK  ] Started Create System Users.
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /var/volatile...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted /var/volatile.
         Starting Load/Save Random Seed...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Found device /sys/subsystem/net/devices/wlan0.
[  OK  ] Started Rebuild Dynamic Linker Cache.
[  OK  ] Started Rebuild Hardware Database.
         Starting udev Coldplug all Devices...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Found device /dev/mmcblk0p5.
[  OK  ] Found device /dev/ttyMFD2.
         Mounting /factory...
[  OK  ] Mounted /factory.
[  OK  ] Reached target Local File Systems.
         Starting Commit a transient machine-id on disk...
         Starting Create Volatile Files and Directories...
         Starting Rebuild Journal Catalog...
[  OK  ] Started Rebuild Journal Catalog.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Reached target Sound Card.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
         Starting Update is Completed...
[  OK  ] Started Network Time Synchronization.
[  OK  ] Started Commit a transient machine-id on disk.
[  OK  ] Started Update is Completed.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Reached target System Initialization.
         Starting sshd.socket.
         Starting Iot REST API server socket.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Listening on Iot REST API server socket.
[  OK  ] Listening on sshd.socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Permit User Sessions...
[  OK  ] Started WPA supplicant daemon (interface-specific version).
[  OK  ] Started Daemon to load edison mcu app binary.
Application available at (physical) address 0x04819000
        VRL mapped to 0xff213000
        App size = 11508 bytes

        App Authentication feature is disabled!
        Resetting IPC

*** Ready to receive application *** 
[  OK  ] Started Bluetooth rf kill event daemon.
[  OK  ] Started D-Bus System Message Bus.
         Starting Connection service...
         Starting Network Service...
         Starting Firewall service for iodine / nodetest...
         Starting Login Service...
         Starting test Python application to see if the infra worked...
[  OK  ] Started Network Service.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started test Python application to see if the infra worked.
[  OK  ] Started Firewall service for iodine / nodetest.
[  OK  ] Started Connection service.
         Starting test node application to see if the infra worked...
[  OK  ] Started Serial Getty on ttyMFD2.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Reached target Network.
         Starting CAN startup service...
[  OK  ] Started Login Service.
[  OK  ] Started CAN startup service.
[  OK  ] Started test node application to see if the infra worked.
         Starting Hostname Service...
         Starting WPA supplicant...
[  OK  ] Reached target Applications.
[  OK  ] Reached target Multi-User System.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started WPA supplicant.
[  OK  ] Started Hostname Service.
[  OK  ] Started Update UTMP about System Runlevel Changes.

Ostro OS 1.0~snapshot-20160428 edison ttyMFD2

edison login: root (automatic login)

Last login: Thu Apr 28 00:41:38 UTC 2016 on tty1
************************************
*** This is a development image! ***
*** Do not use in production.    ***
************************************
root@edison:~#

Intel Edison, Failure, Old Version

******************************
PSH KERNEL VERSION: b0182929
                WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 10:14:01 Jan 13 2015

******* PSH loader *******
PCM page cache size = 192 KB 
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application *** 


U-Boot 2014.04 (Mar 23 2016 - 10:35:12)

       Watchdog enabled
DRAM:  980.6 MiB
MMC:   tangier_sdhci: 0, tangier_sdhci: 1
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0 
Target:blank
Partitioning already done...
Flashing already done...
GADGET DRIVER: usb_dnl_dfu
Card did not respond to voltage select!
** Bad device mmc 1 **
reading vmlinuz
5296624 bytes read in 131 ms (38.6 MiB/s)
Booting from emmc ...
Valid Boot Flag
Setup Size = 0x00003c00
Magic signature found
Using boot protocol version 2.0c
Linux kernel version 3.10.98-yocto-standard (jenkins@ostro-worker-15) #1 SMP PREEMPT Thu Mar 24 08:53:01 UTC 2016
Building boot_params at 0x00090000
Loading bzImage at address 00100000 (5281264 bytes)
Magic signature found
Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlypr"

Starting kernel ...

[    0.612659] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.612738] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[    0.612841] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.612904] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[    1.562079] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[    1.571908] pmic_ccsm pmic_ccsm: Battery Over heat exception
[    1.571988] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary
[    1.670504] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,8)
[    1.670669] emmc_ipanic: panic notified
[    1.670705] emmc_ipanic: Crash partition in use!
[    1.670775] ------------[ cut here ]------------
[    1.670833] WARNING: at /var/lib/jenkins/ostro-worker-15-slot-1-IvKXr/ostro-os/build/tmp-glibc/work-shared/edison/kern)
[    1.670929] Modules linked in:
[    1.670971] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.98-yocto-standard #1
[    1.671021] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 466 2014.06.23:19.20.05
[    1.671077]  00000000 00000000 f6889d64 c18b9a03 f6889d8c c123fc5e c1ab08ad c1aa1bfc
[    1.671174]  0000007b c121f6e7 c121f6e7 f70024c0 00000001 f6ff54c0 f6889d9c c123fd22
[    1.671268]  00000009 00000000 f6889da4 c121f6e7 f6889dc0 c127c1d4 ffff8b71 00000000
[    1.671363] Call Trace:
[    1.671409]  [<c18b9a03>] dump_stack+0x16/0x18
[    1.671459]  [<c123fc5e>] warn_slowpath_common+0x5e/0x80
[    1.671509]  [<c121f6e7>] ? native_smp_send_reschedule+0x57/0x60
[    1.671561]  [<c121f6e7>] ? native_smp_send_reschedule+0x57/0x60
[    1.671616]  [<c123fd22>] warn_slowpath_null+0x22/0x30
[    1.671665]  [<c121f6e7>] native_smp_send_reschedule+0x57/0x60
[    1.671720]  [<c127c1d4>] trigger_load_balance+0x144/0x1f0
[    1.671774]  [<c1270c4d>] scheduler_tick+0xdd/0x110
[    1.671823]  [<c1250846>] update_process_times+0x56/0x70
[    1.671873]  [<c1294496>] tick_sched_handle.isra.11+0x26/0x60
[    1.671924]  [<c129450a>] tick_sched_timer+0x3a/0x70
[    1.671974]  [<c1265748>] ? __remove_hrtimer+0x38/0x90
[    1.672024]  [<c1265bab>] __run_hrtimer+0x7b/0x230
[    1.672070]  [<c12944d0>] ? tick_sched_handle.isra.11+0x60/0x60
[    1.672126]  [<c1266a68>] hrtimer_interrupt+0x208/0x2a0
[    1.672175]  [<c18b8f48>] ? printk+0x1c/0x1e
[    1.672227]  [<c18c3918>] smp_apic_timer_interrupt+0x58/0x8d
[    1.672279]  [<c14c3e44>] ? trace_hardirqs_off_thunk+0xc/0x18
[    1.672331]  [<c18be3f5>] apic_timer_interrupt+0x39/0x40
[    1.672384]  [<c124007b>] ? perf_trace_console+0xcb/0x110
[    1.672436]  [<c14c00d8>] ? format_decode+0x358/0x3d0
[    1.672484]  [<c18b8ecf>] ? panic+0x129/0x164
[    1.672533]  [<c1c25dfb>] mount_block_root+0x1fc/0x204
[    1.672585]  [<c132b6fd>] ? SyS_mknod+0x2d/0x30
[    1.672631]  [<c1c25f29>] mount_root+0x4f/0x57
[    1.672678]  [<c1c26071>] prepare_namespace+0x140/0x171
[    1.672727]  [<c1c25b35>] kernel_init_freeable+0x18b/0x198
[    1.672780]  [<c18ac8c0>] kernel_init+0x10/0x160
[    1.672828]  [<c18c3237>] ret_from_kernel_thread+0x1b/0x28
[    1.672878]  [<c18ac8b0>] ? rest_init+0x80/0x80
[    1.672918] ---[ end trace f79745a19c22847d ]---
...
...
[    0.612620] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.612699] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[    0.612802] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.612865] tpm_tis tpm_tis: Could not get TPM timeouts and durations
[    1.576402] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[    1.586211] pmic_ccsm pmic_ccsm: Battery Over heat exception
[    1.586287] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary


******************************
PSH KERNEL VERSION: b0182929
                WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 10:14:01 Jan 13 2015

******* PSH loader *******
PCM page cache size = 192 KB 
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application ***