IBM Internet Of Things
  • Cover
  • Summary
  • About this Training
    • Objectives
    • Skills
    • Prerequisites
    • Requirements
  • Once Upon A Time ...
  • Introduction
    • Architecture
    • Community
  • Bluemix
    • Internet of Things
    • Getting Started
    • Catalogs
    • Documentation
    • Examples
  • Watson
    • Internet of Things
    • Clients
      • C
      • Python
    • Quick Start
      • IBM Watson IoT Platform Connect
        • Registration
        • Events
    • Services
      • Tone Analyzer
    • Applications
      • Projects
  • Node-RED
    • Installation
      • x86
    • IBM Watson IoT
    • Projects
      • Intel Gpio Digital
      • Input MQTT + Output Debug
      • Input Inject + Output Debug
      • Input MQTT + Output Debug
      • Watson™ Tone Analyzer Service
      • Visitors Center
  • Cloud Foundry CLI
  • Messaging
  • JazzHub
  • Wrap-Up
    • Online Training
    • Challenge
  • SandBox
Powered by GitBook
On this page
  • Intel GPIO Digital
  • @ Node-Red Flow Space
  • Source
  1. Node-RED
  2. Projects

Intel Gpio Digital

Intel GPIO Digital

@ Node-Red Flow Space

  • Intel GPIO Digital Input

    • D8

    • Interrupt Both

  • Intel GPIO Digital Input

    • D2

    • Set Initial Level of Pin to 0 Low

Source

[{"id":"1595ea2d.68d426","type":"mraa-gpio-din","z":"ad6ab99f.842178","name":"","pin":"8","interrupt":"b","x":230,"y":160,"wires":[["202dab13.c26284"]]},{"id":"202dab13.c26284","type":"mraa-gpio-dout","z":"ad6ab99f.842178","name":"","pin":"2","set":true,"level":"0","x":550,"y":160,"wires":[]}]
PreviousProjectsNextInput MQTT + Output Debug

Last updated 7 years ago